UniFi Access Android 2.17.1 includes the following improvements.

Improvements

• Improved overall performance.

UniFi Access Android 2.16.2 includes the following improvements.

Improvements

• Optimized the user experience.

UniFi Access Android 2.16.1 includes the following improvements and bugfixes.

Improvements

• Supports configuring hand wave sensitivity to high or low. Requires UA G2 3.11.3.0 or later.
• Improved door status loading performance on the Dashboard page.
• Supports Arabic. 

Bugfixes

• Fixed an issue where NFC cards registered at Settings > Card Inventory > Add New > select a reader might not respond at the reader.

UniFi Access Android 2.15.0 includes the following improvements.

Improvements

• Improved the Temporary Unlock experience, with the remaining unlock time now clearly displayed.
• Allow setting a custom access policy as the default policy (requires Access 4.1.31 or later).
• Optimized the user experience.

UniFi Access Android 2.14.1 includes the following bugfixes.

Bugfixes

• Fixed a crash that could occur when playing videos in the app on Android 8.0 or earlier.
• Fixed an issue where local login to the console could sometimes fail.

UniFi Access Android 2.14.0 includes the following improvements and bugfixes.

Improvements

• Improved the user experience of video playback in landscape mode.

Bugfixes

• Fixed an issue where NFC cards could not be registered via the app during user or visitor creation.
• Fixed an issue where the progress bar displayed incorrectly during video playback.

UniFi Access Android 2.13.1 includes the following improvements and bugfixes.

Improvements

• Supports adding receivers to Reader Pro/Intercom connected to a switch or console port directly on the Access Android mobile app.
• Optimized the user experience.

Bugfixes

• Fixed an issue where Touch Pass could not be automatically purchased after enabling Auto-Scaling.
• Fixed the issues that might cause the app to crash.

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.12.3 includes the following improvements and bugfixes.

Improvements

• Improved the user experience. 

Bugfixes

• Fixed the issues that might cause the app to crash.

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.12.2 includes the following improvements.

Improvements

• [Identity Enterprise] Supports the Card Inventory feature.
• Supports opening the Access web application for alarm configurations directly from Settings > Alarm Manager.
• Visitor management now requires selecting at least one location when creating or editing a visitor.
• Supports the following languages: Simplified Chinese and Traditional Chinese.

Bugfixes

• Fixed an issue where tablets could not receive doorbell call notifications when the Receive Doorbell Rings via Phone Call option was enabled.

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.11.0 includes the following improvements and bugfixes.

Improvements

• Improved top navigation switching between devices in the Device's details page.
• Added 5-second and 10-second trigger duration options when AUX is set to Siren/Chime for all hubs in Terminal Manager.
• Supports Catalan, Czech, Danish, Greek, Norwegian, Portuguese (Portugal), Swedish, and Turkish.

Bugfixes

• Fixed an issue where the Add Call Group option was missing on the Callers & Receivers page.
• Fixed an issue that prevented removing assigned license plate numbers during user or visitor creation.
• Fixed an issue that prevented modifying the start date and end date when the visitor schedule was set to a predefined schedule.

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.10.1 includes the following bugfixes.

Bugfixes

• Fixed an issue where door names were sometimes not displayed on doorbell call screens, such as incoming calls on a locked phone screen.
• Fixed the issues that might cause the app to crash.

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.10.0 includes the following improvements.

Improvements

• Supports Unlock Schedule for UA Hub Elevator.
• Optimized video loading speed in System Log when Manage Recordings in Protect is enabled. 
• Applicable devices: 
• UA G2 Pro
• UA G3 Pro
• UA Intercom
• UA G3 Intercom
• Requirements: 
• UniFi OS 4.3.6 or later
• Protect application 6.0.41 or later 
• Access application 3.3.22 or later
• Admins can now disable the ability to initiate live view from both Identity Endpoint and Intercom Viewer. Requirements:
• Identity Endpoint iOS 2.2.0 or later
• Identity Endpoint Android 2.2.0 or later
• Intercom Viewer 1.4.39 or later
• Separated duration settings for manually initiated live view and doorbell-triggered live view sessions in Settings > General > Doorbell and Live View. Requirements:
• Access application 3.3.22 or later
• UA G2 Pro 1.11.23.0 or later
• UA G3 Pro 1.11.22.0 or later
• UA Intercom 1.8.22.0 or later
• UA G3 Intercom 1.8.22.0 or later
• UA Pro 2.15.9 or later
• Supports searching locations in the Dashboard for easier navigation.
• Supports navigating to the previous or next video directly in the System Log.
• Supports customizing the screen brightness duration before it dims, available in the device details page. Requirements:
• Access application 3.3.22 or later
• UA G2 Pro 1.11.23.0 or later
• UA G3 Pro 1.11.22.0 or later
• UA Intercom 1.8.22.0 or later
• UA G3 Intercom 1.8.22.0 or later

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.9.1 includes the following bugfixes.

Bugfixes

• Fixed an issue where the Lock Now button was not displayed on a door's details page when the door status was open.
• Fixed an issue that caused connection failures when manually connecting to a console on a different VLAN via Find Local Consoles > Connect Manually.

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.9.0 includes the following improvements and bugfixes.

Improvements

• Supports switching between cameras during live view or door unlock video playback.
• UA Hub Door's Door Operator terminal now supports Siren and Chime modes.Requires Access 3.3.10 or later.
• Optimized live view and playback page layouts for landscape mode.
• Supports dual Unlock buttons in live view when UA Hub Gate's gate closing action is set to Gates Closed by a Gate Operator.
• Optimized the multilingual user interface.

Bugfixes

• Fixed an issue where the year was missing from the timestamp when notifications are muted.

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.8.3 includes the following improvements.

Improvements

• Optimized the Touch Pass user experience.

UniFi Access Android 2.8.2 includes the following bugfixes.

Improvements

• Fixed an issue where switching to Russian, Japanese, or Portuguese sometimes caused a crash when navigating to Devices > Readers > select a reader > Settings.

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.8.1 includes the following bugfixes.

Bugfixes

• Fixed a potential app crash issue when switching to French and entering the User details page.

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.8.0 includes the following improvements and bugfixes.

Improvements

• Supports creating and managing location groups in the Dashboard.  
• Supports stopping doorbell call receivers from receiving doorbell calls on the mobile app by disabling Notify Admins of Doorbell Ring in Settings > General > Doorbell and Live View. 
• When disabled, receivers need to use the Identity Endpoint for mobile to receive doorbell call notifications. Requires Access 3.2.31 or later.
• Supports multiple languages: Portuguese (Brazil), Spanish (Mexico), German, Russian, French, Japanese, Korean, Polish, Dutch, Italian, and Spanish. Go to the upper-left Profile icon > App Preferences > Select Language.
• Supports setting the reader direction as entry or exit for Intercom and G3 Intercom. 

Bugfixes

• Fixed an issue where the location thumbnail sometimes did not update immediately after modification, requiring a manual refresh.
• Fixed an issue where the previously set predefined schedule name was incorrectly displayed after the Unlock Schedule was disabled. 

Additional information

This version is undergoing a gradual release and will be rolled out in stages.

UniFi Access Android 2.7.2 includes the following bugfixes.

Bugfixes

• Fixed an issue where the Touch Pass list sometimes failed to display.

UniFi Access Android 2.7.1 includes the following improvements and bugfixes.

Improvements

• Supports controlling whether to display a door's unlock schedule on the associated reader's screen in Devices > Readers > select a Pro Reader or Intercom > Settings > Advanced > Show Unlock Schedule on Screen. Version requirements:
• Access application 3.1.41 or later
• Intercom1.6.15 or later
• G2 Pro 1.9.17 or later
• G3 Pro 1.9.6 or later
• UA Pro 2.13.8 or later

Bugfixes

• Fixed an issue where a connection failed message could appear when answering the doorbell through live view.
• Fixed a potential issue where a console connection failed message could appear.
• Fixed an issue where a removed device might still appear in the Devices list with a "Tap to Learn More" status.

Additional information

This version is undergoing a gradual release and will be rolled out in stages.